除尘后采样探头

1.采样温度:Max. 600(最高)            
2.工作环境温度:value="20" unitname="℃" w:st="on">-20℃～+value="80" unitname="℃" w:st="on">80℃       
3.采样腔加热温度: value="150" unitname="℃" w:st="on">150℃(可选:value="180" unitname="℃" w:st="on">180℃)                  
4.陶瓷滤芯,过滤精度:2um ,L=value="75" unitname="mm" w:st="on">75mm，可选SS316滤芯               
5.过滤腔容量:value="40" unitname="cm" w:st="on">40cm³                                            
6.带单路反吹，反吹气控制单元(进口高温气动阀\单向阀\电磁阀等)                                                           
7.反吹气源: 仪用压缩空气，压力范围:0.4mBar-0.8mBar，反吹气接口：OD6/value="4" unitname="mm" w:st="on">4mm或OD8/value="6" unitname="mm" w:st="on">6mm卡套式接头
8.采样气出口：OD6/value="4" unitname="mm" w:st="on">4mm或OD8/value="6" unitname="mm" w:st="on">6mm SS316卡套式接头,                                                               
9.备有校准气入口，为OD6/value="4" unitname="mm" w:st="on">4mm或OD8/value="6" unitname="mm" w:st="on">6mm卡套接头                                          
10.供电电源：220VAC/50Hz/600W                         
11.防护等级:IP65                                                                               
12.安装附件:安装法兰盘\对装法兰盘\
 13.采样探杆 ：value="1" unitname="米" w:st="on">1米 value="1.2" unitname="米" w:st="on">1.2米  value="1.5" unitname="米" w:st="on">1.5米  直径30  可根据客户定制